Table Fan

Materials needed:
-   16 x red rectangular packets for fan
-   16 x red rectangular packets for sticks
-   16 x red rectangular packets for stand
-    1 x red square packets for bird
-    1 x ribbon
-    1 x rubber band
-    Lots of staples

You can also watch the youtube video from ; http://www.youtube.com/watch?v=FlTOEkD9wVg&feature=related

Gold Fish Lantern

Materials Needed:
-   7 x red rectangular packets
-   2 eyes
-   staple and glue
-   red thread for hanging and tassel

Instructions:

1.  To fold the mouth and fins. Use 2x red packets and fold as shown above. Only staple the mouth area. The final product will be:

2.  Staple in the red thread for hanging on the top fin and tassel on the bottom fin. Then staple close the fins. Set aside.

3.    For the body part -  Fold 2x red packets as shown:
You will get this:  only staple one side for inserting the mouth and fins.

 4.    Insert the mouth and fins to the body part. Staple to close both the other end of the body.  Set aside.

5.   For the tails, fold 3x red packets as shown;

Using a Large staple, staple the flat ends of the tails together.

Fluff the tails up and glue them to the body part.

Wait at least 5 mins for the glue to dry then glue in the eyes of the fish and finally, tie a ribbon at the tail to form the whole gold fish.

Simple Fish

This is a simple fish, just using only 1 red packet. Found it on the youtube tutorial. Here's the link:
http://www.youtube.com/watch?v=i8oK_wIYgkE&feature=related

Instructions;

Lucky 8 Lantern

I found the Lucky 8 Lantern tutorial at youtube. Here's the link if you want to see the video:
http://www.youtube.com/watch?v=jsDd8PSS0v8&feature=related

It is very easy to make but must choose a very nice red packet so that it stands out.

Materials needed:

- 14 x medium size rectangular Red Packets
- Lots of staples
- glue
- tassle for bottom and red thread for hanging

Instruction:

Fan Red Packet Lantern

This Fan Lantern is not easy to make. But if you can follow the video from youtube, then it would be a breeze. Here's the link : http://www.youtube.com/watch?v=T4ch-aLBGFk

I use my left over Ang Pow from last few years but they could not add up to the 12 long packets that I needed. So, I am only able to make 1 fan so far.

What you need:
- 12 x long red packets for fan,
- 13 x medium red packets for sticks (uses square packets)
- 4 x medium red packets for fan handle (uses 8 square packets)
- 1 x square red packets for handle holder

Directions:

1.                13x medium red packets for sticks - this is how it's gonna look above. Set aside.

2.                4x medium red packets for fan handle - fold to look like an accordian or mountain. Join all 4x medium red packets togeether with double-sided tape.

this is how it would look after joining all 4x red packets together. see above. I uses 8x square red packets instead as my left over from last few years.

3.                         Attached sticks (from No. 1) to the 13x long red packets -

continue till you finish all 13x long red packets. They will look like below;

4.                       Once you are done, you can attach the mountain/accordian fan handle to the fan.

The above is how the fan will look after attaching the fan handle.

5.                          To hold the handle in, fold 1x medium red packet into a binder as shown below.

Bind the fan handle, the whole fan will look like below;

I put a rabbit below the fan to make it look cute :). Anyway, here's wishing all a Hopping Rabbit Year with full of Happy and Leaping Good Health............ Hope this tutorial is clear enough for my next year CNY project.

Double Happiness Fish

Making this angel fish is actually not that difficult. You just have to get the materials ready before you begin.

Materials: (for 1 fish only)
- 10 small red packets
- 8 small cardboard size (same size as the red packets)
- 2 eyes (small or medium)
- ribbons for tails
- gold coin/coin bag tassels ( can get at chinatown for $1 each)
- Red strings for hanging and green beads or pearl
- double-sided tape (small/thin ones) and glue

Method:

1.   Cut out 8 cardboard using the fig below as guide into 8 models as shown in the red outline.

2.   Insert the 8 models into 8 small red packets. Follow the folding method to get into the fish's body parts.

3.    Use double sided tape to tape in the sides and form the fish body.

4. staple in the red string with beads for hanging at the top tip of the fish fin and the gold coin tassle at the bottom of the fish fin. set aside.

5.   Fish tail : 2 small red packet

6.  insert the tail into the body of the fish back using glue. Leave to dry for at least 5 mins before tying a ribbon around the tail.
7.  glue the fish eyes and you are done with the Happiness Fish. Now you can make another one using the same steps and you will have DOUBLE HAPPINESS FISH!

>>>>>>>>>HAPPY CHINESE NEW YEAR 2011<<<<<<<<<<<